Category Archives: Design

Design a basic part with TopSolid 7

Following are 5 videos that will walk you through designing of a basic part with TopSolid 7. You will note the part design is based off of a simple 2d drawing.  In these videos, one of our Application Engineers will walk you through some of the basic tools that you will use everyday with TopSolid.

Step 1 – Build a sketch, constrain it and revolve it into a solid model

Step 2 – Create a radial drilling and repeat it

Step 3 – Create a sketch, use construction geometry, create a boss, and trim your part

Continue reading Design a basic part with TopSolid 7

TopSolid Modeling Tutorial

Time Line Solid Modeling

Let me start by saying… “Welcome to TopSolid 7! In this video…” but there I have to stop.  Because in this case, there is more than just ONE video.  Cad - Solid modeling

In this video tutorial series, there are actually 16 videos in total. They start by an introduction and progress step by step through each major step in the process of learning basic solid modeling.

This tutorial will cover a lot of ground quickly and should give you the knowledge you need to begin solid modeling within TopSolid 7.

Before you begin watching the tutorials, I suggest that you take a minute and download the samples that go with the tutorials.  You will find each below.

Samples

You can either download the sample TopSolid Solid Modeling Tutorial package which contains the completed model, the drawings (in TopSolid format), and the PDF of the drawings.  Or you can download just the PDF and work within your own project. The choice is yours.

TS7-Download
PDF Only
TS7-Download
Full Package

TopSolid Modeling Tutorial Introduction

Continue reading TopSolid Modeling Tutorial