Tag Archives: Convert

Getting Started: Basic 2d Mill Tutorial

TopSolid Getting Started Tutorial logo

In this TopSolid Getting Started video tutorial series, you will be introduced step by step to the basics of how to create tool path for a basic 2d mill part.  This will include:

  • A review of the basic TopSolid settings used to create this tutorial
  • Importation of the tutorial project
  • Step by step videos to machine the part through completion
  • How to use Verify
  • Post processing
  • Creation of setup sheets

Part to machine for tutorial

The goal of this tutorial is to help new users of TopSolid get up and running with our solution quickly and efficiently.

This tutorial does not fully explain each option that is used. Instead it shows you the basics so that you can begin to fully explore what TopSolid’Cam can do for you.

In order to use this tutorial, you will need to download the tutorial assets.  Below are a couple of links that you can use. You can download just the project file with the Parasolid file.  Or you can download the project file, with the Parasolid file and a copy of all of the videos that go with the tutorial.  The second option is quite the large download. But with this download, you don’t need to have web access to watch the videos.  The choice is yours.

Sample project download
Sample Package (50 Kb’s)
Sample project download
Sample Package with videos (548 Mb’s)

After you have downloaded the project, please proceed to watching the videos. Again, if you downloaded the project with the videos, you can watch them from inside of TopSolid. Otherwise, the videos for this tutorial are as follows.

TopSolid Cam 2d Mill Basic-Before you Start

In this video, you will see how to modify some of the settings within TopSolid. It is important to check your settings so that they match the settings used in this tutorial. If you don’t, TopSolid may react differently from what you see in the video. These differences will only be things like default values, unit of measure and such.  However, for the best experience possible with this tutorial, we recommend you to modify your settings to match ours.

Step 1

In step 1 of the basic 2d cam tutorial for TopSolid 7, you start by importing the package Continue reading Getting Started: Basic 2d Mill Tutorial